Amigurumi Cute Bat Free Pattern

Hello…

One of the amigurumi free crochet patterns we will share today is amigurumi bat designed and photos by Olga Bespartochnaya. Learn how to crochet this bat using a free amigurumi pattern. Thanks to Olga Bespartochnaya (@olga_bespartochnaya) for this cute bat.

Below you will find some information about this pattern. Remember, you can ask for help by sharing your problem with amigurumi in our Facebook group. Have fun…

If you don’t know how to often crochet and needles, read our shares. Start your knitting according to the rate you have according to the shape you will make. Shape your toy by increasing and decreasing the point. Once you weave the shape you want to fill the inside of your toy and look at the pictures to decorate. Follow us on Facebook and Pinterest to be aware of the amigurumi crochet patterns we share everyday.
Amigurumi cats, amigurumi dolls, amigurumi dogs, amigurumi unicorns, amigurumi lambs, amigurumi dinosaurs, amigurumi foxes, amigurumi bears, amigurumi giraffes, amigurumi pigs, amigurumi penguins, amigurumi panda, amigurumi llama, amigurumi bunny, amigurumi clowns, amigurumi elephants, amigurumi hippos, amigurumi monkeys will not be difficult for you…

FACEBOOK PAGE: Amigurumi Lovers & Amigurumi Land & Always Free Amigurumi
FACEBOOK GROUP: Amigurumi Free Patterns
PINTEREST: Amigurumi Free Pattern Shares

Materials

• Any yarn is yellow. I used yarn to knit a mouse Alize Diva 350m / 100g. Hook number 1.6mm.
• The yarn is light green in color for knitting the abdomen and limes. I used YarnArt Begonia yarn 169m / 50g.
• For knitting eyes used a thinner yarn Alize Miss 280m / 50g. The color is white and black. Hook 1.0mm. Threads floss acrylic – green.
• Any yarn of white, dark green and orange color for knitting leaves and flower

• Hook under your yarn. I used No. 1.65mm and No. 1.0mm.
• Holofiber filler or syntepuh.
• Wire for wings.
• Material for wire winding – adhesive tape, electrical tape.
• Needle for stitching.
• White felt for teeth.
• Thermal gun for gluing teeth and a flower. Growth of the finished toy when using the materials indicated by me – 15 cm (without ears), 20 cm (including ears).
The difficulty level is medium.

Abbreviations

R = row
mc = magic circle
ch = chain
sc = single crochet
hdc = half double crochet
sl st = slip stitch
inc = increase (2 sc in one st)
dec = decrease (2 sc together)
BLO = back loop only
FLO = front loop only
F.o. = finish off
(…) = repeat the instructions in brackets the given number of times
[…] = number of stitches you should have at the end of the round/row

AMIGURUMI CUTE BAT CROCHET FREE PATTERN

Legs (make two)

Knit yellow yarn
1 row: 6 sc in mc (6)
2 row: inc, 5 sc (7)
3 row: inc, 6 sc (8)
4 row: inc, 7 sc (9)
5 row: inc, 8 sc (10)
6 row: inc, 9 sc (11)
7 row: inc, 10 sc (12)
8 row: inc, 11 sc (13)
9 row: inc, 12 sc (14)
10 row: (not complete): 7 sc (7).
On one leg, cut and fasten the thread. Similarly, we knit the second leg, just do not cut the thread.

Body

We continue to knit with yellow yarn. Stuff the body as you knit.
We connect two legs together. We connect correctly!
Note: leg increases should be on the outside, see a photo.
11 row: 4 ch, attach the second leg, 14 sc along the second leg, 4 sc along ch,
14 sc on the first leg, 4 sc on ch (36)
12 row: (5 sc, inc) * 6 (42)
13 row: (6 sc, inc) * 6 (48)
14-20 row: 48 sc (48)
21 row: (6 sc, dec) * 6 (42)
22-25 row: 42 sc (42)
26 row: 8 sc, 2dec, 17 sc, 2dec, 9 sc (38)

Note: The decrease should be on the sides of the body. Do not forget to stuff.
27-28 row: 38 sc (38)
29 row: 8 sc, dec, 18 sc, dec, 8 sc (36)
30 row: (10 sc, dec) * 3 (33)
31 row: (9 sc, dec) * 3 (30)
32 row: 30 sc
33 row: (3 sc, dec) * 6 (24)
34 row: (2 sc, dec) * 6 (18)
Do not cut the thread, continue to knit the head

Head

We continue knitting with yellow yarn.
35 row: 18 inc (36)
36 row: (5 sc, inc) * 6 (42)
37 row: (6 sc, inc) * 6 (48)
38 row: (7 sc, inc) * 6 (54)
39 row: (8 sc, inc) * 6 (60)
40-50 row: 60 sc (60)
51 row: (8 sc, dec) * 6 (54)
52 row: 54 sc (54)
53 row: (7 sc, dec) * 6 (48)

We fill our heads in the course of knitting.
54 row: 48 sc (48)
55 row: (6 sc, dec) * 6 (42)
56 row: 42 sc (42)
57 row: (5 sc, dec) * 6 (36)
58 row: (4 sc, dec) * 6 (30)
59 row: (3 sc, dec) * 6 (24)
60 row: (2 sc, dec) * 6 (18)
61 row: (sc, dec) * 6 (12)
62 row: 6 dec.
To fill. Cut and fasten the thread.

Ears (make two)

Knit with yellow yarn.
1 row: 6 sc in mc (6)
2 row: (sc, inc) * 3 (9)
3-4 row: 9 sc (9)
5 row: (2 sc, inc) * 3 (12)
6-7 row: 12 sc (12)
8 row: (sc, inc) * 6 (18)
9 row: 18 sc (18)
10 row: (2 sc, inc) * 6 (24)
11 row: (3 sc, inc) * 6 (30)
12-23 row: 30 sc (30)
24 row: (3 sc, dec) * 6 (24)
25-28 row: 24 sc (24)
29 row: (2 sc, dec) * 6 (18)
30-32 row: 18 sc (18)
Do not stuff. Cut the thread leaving a long end for sewing.

Wings (make two)

We knit yellow yarn in rotary rows.
1 row: 3 sc in mc (3) turn
2 row: ch, 3 inc (6) turn

3 row: ch, (1 sc, inc) * 3 (9) turn
4 row: ch, (2 sc, inc) * 3 (12) turn
5 row: ch, (3 sc, inc) * 3 (15) turn
6 row: ch, (4 sc, inc) * 3 (18) turn
7 row: ch, (5 sc, inc) * 3 (21) turn
8 row: ch, (6 sc, inc) * 3 (24) turn
9 row: ch, (7 sc, inc) * 3 (27) turn
10 row: ch, (8 sc, inc) * 3 (30) turn
11 row: ch, (9 sc, inc) * 3 (33) turn
12 row: ch, (10 sc, inc) * 3 (36) turn
13 row: ch, (11 sc, inc) * 3 (39) turn
14 row (not complete): 3ch, 2Dc, 2Hdc, 1 sc, 3Sl-st, 1 sc, 2Hdc, 2Dc, 13 sc (26) turn
15 row: ch, 13 sc (13) turn
16 row: 3ch, 2Dc, 2Hdc, 1 sc, 3Sl-st, 1 sc, 2Hdc, 2Dc, 3ch, Sl-st in the loop previous row (see photo), 2Dc, 2Hdc, 1 sc, 3Sl-st, 1 sc, 2Hdc, 2Dc
(26)

Do not cut the thread, we will tie the wing. We take a thin wire the size is slightly larger than the wing (approximately 10cm, excess cut off). One wrap the end with adhesive tape. Not very thick, otherwise it will be difficult hide with threads. Attach the wire to the wing and tie sc only the upper part of the wing. Wire end wrapped should not look out with a band-aid, move it a little closer to the middle wings (see photo). Cut the thread leaving a long end. Neatly we trim with a thread those places where the adhesive plaster is noticeable. Fasten the thread and crop.

Similarly, we knit the second wing.

Note: We tie the wire on the second wing on the other side, so that you don’t get two right or two left wings. Be guided by to your wings.

Eardrums on wings:
We knit the membranes with yellow yarn on the back of the wings, in those places where were the increases. Do not tighten the hinges so that the wing does not contract. Enter hook to the very top of the wing and put the loop on the side where there will be membranes. Insert the hook with the loop again into the same loop and pull a row below, grab the thread and knit sc. We knit so until the bottom. Cut and fasten the thread.

Similarly, we knit the remaining 3 membranes.

Tummy

We start knitting with white yarn.
1 row: 6 sc in mc (6)
Change the thread to light green.
2 row: 6 inc (12)
3 row: (1 sc, inc) * 6 (18)
4 row: (2 sc, inc) * 6 (24)
5 row: (3 sc, inc) * 6 (30)
Change the thread to white.
6 row: (4 sc, inc) * 6 (36)
Change the thread to green.
7 row: (5 sc, inc) * 6 (42)
Cut the thread, leaving a long end for sewing. White yarn embroider strips on a tummy-lime circle.

Tail

Knit with green yarn.
1 row: 6 sc in mc (6)
2 row: ZZP 6 sc (6)
3-5 row: 6 sc (6)
6 row: 6 inc (12)
Cut the thread, leaving a long end for sewing.

Leaves (make two)

Knit with green yarn.
1 row: 10ch from the 2nd loop from the hook 3Sl-st, 1 sc, Hdc, Dc, Dc, Dc, Hdc, 3 ch, on the back: Hdc, Dc, Dc, Dc, Hdc, 1 sc, 3Sl-st.

Flower

Knit with a white thread.
1 row: 6 sc in mc (6)
2 row: sc, 5 ch, from the 2nd loop from the hook 4 sc, sc to the base) * 6
You should get 6 petals. In the middle we stretch the loops orange thread. We fix it, you can glue so that the middle is not stretched out. Cut the thread. If the flower will be sewn, leave long end. I glued a flower to my head with a gun, so fixed the thread and cut it.

Eyes (make two)

We knit with a thinner thread, you can use threads for knitting a mouline thread acrylic in two additions. Hook number 1. I used Alize Miss yarn (white and black colors). For the iris, I took green thread floss.
We knit black yarn, hook number 1.
1 row: 6 sc in mc (6)
2 row: 6inc (12)
3 row: (sc, inc) * 6 (18)
change the thread to green.
4 row: (2 sc, inc) * 6 (24)
5 row: (3 sc, inc) * 6 (30)
Change the thread to white.
6 row: (4 sc, inc) * 6 (36)
Cut the thread, leaving a long end for sewing. Embroider white flare flare.

Decor

Fix the ears with needles on the head so that they are symmetrical. Sew on. Sew the tummy, tail, leaves and flower. The flower can be glued with a thermal gun.

Sew on eyes, embroider nose and mouth. From felt to cut two small tooth and stick them or sew.

We sew the wings with membranes inside. Wrap the ends of the wire with a band-aid and insert in the middle of the mouse body. Sew carefully wings to the body.

Big lime

We knit light green yarn.
1 row: 6 sc in mc (6)
2 row: (sc, inc) * 3 (9)
3 row: 9 sc (9)
4 row: (2 sc, inc) * 3 (12)
5 row: (sc, inc) * 6 (18)
6 row: (2 sc, inc) * 6 (24)
7 row: (3 sc, inc) * 6 (30)
8-16 row: 30 sc (30)

We fill in the course of knitting.
17 row: (3 sc, dec) * 6 (24)
18 row: (2 sc, dec) * 6 (18)
19 row: (sc, dec) * 6 (12)
20 row: (2 sc, dec) * 3 (9)
21 row: 9 sc (9)
22 row: (sc, dec) * 3 (6)
Trim, fasten and hide the thread inside the lime.

Little lime

We knit light green yarn.
1 row: 6 sc in mc (6)
2 row: 6 sc (6)
3 row: (sc, inc) * 3 (9)
4 row: 9 inc (18)
5-10 row: 18 sc (18)
We fill in the course of knitting.
11 row: (sc, dec) * 6 (12)
12 row: (2 sc, dec) * 3 (9)
13 row: (sc, dec) * 3 (6)
Trim, fasten and hide the thread inside the lime.
Ready!

You can find more amigurumi bat ideas down here: